crushermachine2's blog

In recent years, the rapid development of the domestic machinery industry, the current variety of machinery on the market more complete, fully able to meet the needs of most domestic markets, this is a great process. One of the most typical is the flour mill, flour mill industry, the rapid development of the rapid, ultrafine mill technology is accompanied by modern high-tech and new materials industry in recent years developed a new crushing engineering technology, and now Has become one of the most important deep processing technologies for industrial minerals and other raw materials and is of great significance to the development of modern high-tech industries. Then in the production and sale of the mill, there are some common problems. The maintenance of the machine is an extremely important regular work. It should be closely coordinated with extreme operations and maintenance, and should be carried out by dedicated staff Watch on duty.

Mill machine equipment common problems:

one. Mill equipment grinding roller, grinding disc lining wear repair

two. Grinder mill roller bearing wear repair

three. Mill reducer leakage treatment

Mill equipment maintenance:

1, the bearing bear the full load of the machine, so a good lubrication of the bearing life has a great relationship, it directly affects the life of the machine and operation rate, thus requiring injection of lubricating oil must be clean, the seal must be good, the machine Main oiling place (1) Rotating bearings (2) Roller bearings (3) All gears (4) Movable bearings, sliding plane. 2, the newly installed wheel loosening prone to frequent checks must be carried out.

3, pay attention to the work of the various parts of the machine is normal. The company is located in:

4, pay attention to check the wear of wear parts, always pay attention to replace the worn parts.

5, put the mobile device chassis plane, dust and other objects should be out to avoid the machine can not crush the material encountered when the bearing can not move on the chassis, resulting in serious accidents.

6, bearing oil temperature rise, should immediately stop the inspection to eliminate.

7, rotating gears in the operation if the impact of sound should immediately stop inspection and eliminate.

With the rapid economic growth in the country, mill equipment plays an important role in the field of engineering. Today, the mill industry has gone through stages of development that rely on cheap labor and sacrificing the environment. In response to the development trend of low-carbon economy, milling Machine industry is moving in the direction of energy saving and environmental protection. At the same time, the concept of government at all levels is changing. Meanwhile, the mill manufacturing enterprises also need to further emancipate their minds, broaden their horizons and treat the development of the industry with an international strategic vision.

1, high energy-saving ultrafine mill, power consumption is only one-third of the same amount of flour milling machine, saving 42 degrees per hour and the output is higher than 50%. If the whole calculation can save 63 degrees per hour. At the same time can save cooling water. Is energy saving, emission reduction ideal product.

2, there is no accumulation of dead material in the steel mill, 岀 powder quickly without the need to often open the steel mill door clean up expected.

3, milling knife gap adjustment easy to adjust the work gap can be opened repeatedly after the steel mill door, close the door does not affect the fineness of the powder.

4, small size, easy installation, convenient transportation, easy operation and maintenance, without cooling pool covers an area of small.

5, low labor intensity, no need to climb high feeding. At a distance of 90 cm from the ground, add material to the hopper.

6, continuous production, milling machine automatically complete the entire process of milling until a qualified powder.

7, the mill is fully enclosed body, no dust spread.

8, start fast, smooth operation, low noise.

9, milling machine tool can be used repeatedly grinding mill repair.

Raymond mill equipment is mainly focused on the grinding of primary mineral resources such as gypsum, talc, fluorite, calcite, limestone, marble, pyrophyllite, potassium feldspar, barite, kyanite, illite, vermiculite, sea Stone, attapulgite, rectorite, dolomite, maifanite, iron ore, phosphate rock, coal gangue, raw stone, garnet, Diego rock, basalt, purple sandstone, fluorite, oxidation Iron, milled quartz, shale, green turbid rock, granite, rhyolite, mesosulfur, zircon sand, silicon carbide, red mud, earth, clay, rare earth, kaolin, kaolin, bentonite, bauxite, Diatomite, chemical compounds, fertilizers, compound fertilizers, fly ash, manganese ore, gold ore, titanium ore, copper ore, chrome ore, coal, char, lignite, pulverized coal, bone meal, titanium dioxide, slag, charcoal Black, activated carbon, glass, non-metallic, metal oxides, cement clinker, colored glass, refractories, insulation materials, chemical raw materials, as many as 300 kinds of material hardness Mohs' Degree, the applicable industries are: metallurgy, building materials, chemicals, mining Mountain, pharmaceutical, cement, raw material ore, pharmaceutical, thermal power, steel, porcelain industry, daily chemical industry, environmental protection, construction of roads, water conservancy, national defense (including the magnesium industry for the blast furnace refractory layer, building materials industry ceramics , Glass white cement and other products of raw materials), which finished fineness control in 613 microns to 440 microns (0.613 mm -0.44 mm) between. raymond mill equipment for the main object of grinding brittle material, plastic material is not suitable for high. As the plastic material prone to deformation in the rolling process, not easy to smash, such as rubber, plastic and so on. The brittle material impact resistance is poor, easy to crush, such as marble, limestone and so on. Raymond mill equipment for the environmental protection industry has great applicability, such as urban construction generated a lot of construction waste, through the construction of garbage crushed into finished products made of unburned brick. In addition there are stone paper technology, through the stone in the calcium carbonate into ultra-fine particles after blow molding into paper, etc., in the environmental protection industry has been a very good application. According to the different nature of the material can suppress the development of Raymond grinding equipment with different properties, the development of materials can be more broad scope of application.

More than half a month is coming to our traditional festival Spring Festival. Looking back on 2013, it feels like a dream has passed. I feel there has not been any harvest yet. Time slips away from my fingers. The rest Are endless remorse, but time continues, when we face remorse or continue to look forward to, since 2013 we have no gain, in 2014, each of us must want to make a lot of money, you want fast Get rich. Throughout the 2014 construction waste crusher market, setbacks, there must be, hardships, there must be, but the sweetness is also a lot of our building waste crusher market has been depressed for so long, it is time to reverse And, like the saying of many people, things are very negative. So, for the moment, the outlook for our construction waste crusher market in 2014 is very optimistic, but optimism does not necessarily mean that we can go sit and enjoy, after all, there is no free lunch, you want to have a harvest, We must pay our own efforts. So, 2013 is coming to an end, and each one of us has to set ourselves a perfect goal so that we will not spend it again in 2014.

Here, these words, but also what our SBM heavy industry say to ourselves, we do not go on such a mixed development, we need to do is to reorganize their feelings and strategies, in 2014, so that Our construction waste crushers have a good prospect of finding more outlets for them, rather than just going flat.

In recent years, with the rapid development and widespread application of the construction waste crusher industry, more and more people are realizing the potential and prospects of the construction waste crushing machinery industry. More manufacturers are beginning to join the crusher industry. We have been manufacturing machinery and equipment for many years and have rich experience in production. Our construction waste crusher is also our best equipment, so today we would like to tell everyone about the installation and commissioning of the construction waste crusher.

1, the first machine leveling, firmly fixed on the cement foundation.

2, clean the oil and debris on the machine, the transmission, sports parts filling oil.

3, check the various parts of the screw is loose.

4, adjust dial, stamping and other parts of the position of the degree and clearance, after adjusting the hand-driven pulley, the operating parts should be able to operate freely.

5, the host pulley steering clockwise clockwise. Prohibited inversion, before turning off the triangle with the test motor steering, the steering wheel and motor rotation steering wheel alignment can be fitted with a test strip.

6, when the test machine first use the jog method to make the motor pulse rotation, such as no other noise, the normal operation before driving. Heavy truck is strictly prohibited to start until the machine is functioning properly before feeding production.

construction waste crusher in the market with its own strength has made some achievements, by everyone's favorite, suitable for our customers to use.

Excellent design of construction waste crusher, highlighting its own characteristics and advantages, a unique direction of development for our SBM Heavy Industry has brought good sales results, expanding the sales market throughout the industry, but also to provide customers with the best production Equipment to meet the various requirements of our customers. We SBM engaged in the machinery industry for many years, has a wealth of production experience, construction waste crusher is our production of equipment, we, as a professional manufacturer, is to give you the best equipment for everyone to the best service, so today , We would like to tell everyone about the workflow of the construction waste crusher.

After a long period of study and practice to develop and produce a new type of construction waste crusher. This machine is equivalent to two hammers broken into one, a reasonable combination into a whole, the use of double rotor up and down two crushed, two sets of rotors used in tandem, crushing ratio, high production efficiency. The machine has no mesh grate at the bottom of the material moisture content is not strictly required, high humidity material, not blocked, no mesh grate at the end, high hard material, high humidity material, to ensure never blocked feed water content up to 100 % Water content of fineness of 90% all in 2MM (mm below) 1MM (mm below) accounted for 70%, wet and dry, rainy day as usual. There is no problem of clogging the sieve plate at all, but there is no problem that the fine powder can not be discharged in time and the pulverization is repeated. Therefore, the crushing efficiency is high, and there is no phenomenon of invalid hammerhead wear. Wear-resistant combination of hammerhead, high alloy wear hammerhead. Hammer handle combination, only change the hammer, do not change the hammer handle. Hammer wear and tear after repeated use of mobile locations, a hammer can be used top three hammer. Only one person can easily open and close, not only lightweight and fast and safe, easy to maintain, the overall structure is reasonable and simple operation. The <a href="http://www.rosenspa.com/">construction waste crusher</a> makes the whole machine have the advantages of reasonable structure, convenient installation, high efficiency, remarkable energy saving, durability and easy maintenance.

construction waste crusher by virtue of its own strength has made some achievements, by everyone's favorite. I also believe that customers who have used our factory equipment also know how our construction waste crushers are. So if you are interested in this device, you can pay attention to our this site can also come to our manufacturers, we do exchanges, SBM welcome everyone at any time.

In recent years, with the rapid development and widespread application of the construction waste crusher industry, the crushing effect of the equipment structure is irreplaceable. Buy good quality and good equipment. More and more people are aware of the potential and prospects of the construction waste crushing machinery industry, more manufacturers began to join the crusher industry. construction waste crusher is produced by our multiple tests, has a certain strength. Well today, let's talk about the method of lubrication and maintenance of the construction waste crusher.

1, often pay attention to timely lubrication of the friction surface, to ensure the normal operation of the machine and extend the service life.

2, the machine uses grease, should be based on the use of location, temperature and other conditions to decide, the general can use calcium, sodium or calcium sodium grease.

3, to join the bearing grease for its volume of 50-70%, must be replaced once every three months; for new oil must be cleaned with clean gasoline or kerosene bearings and bearing seat dirt.

4, brackets and brackets contact at the machine before the start, you must add grease.

If you have any unclear or want to know, you can come to our factory, our technical staff here will give you a detailed explanation, SBM also welcome everyone at any time.

In the market, more and more users are beginning to invest in startup machinery and equipment. In recent years, the machinery and equipment in the market have also achieved good results. The sales of construction rubbish crushers can be considered as good, but the price What about the quality of a cheap construction waste crusher, let's take a look at it.

We SBM Heavy Industries as an old manufacturer, has always been to produce good equipment for everyone to everyone good service, we have also been increasing research and development efforts to technological innovation to meet the development of the industry within the wave of reform, with excellent Of the performance won the user recognition of us, rely on the strong technical support from the development of the road, in the future so that we will not forget the future development of their social responsibility, spare no effort to contribute all their own power to boost the domestic crushing technology Upgrade. Construction waste shredder as our best equipment, but also absolutely did not live up to the trust of our manufacturers, from the market till now, has been the darling of users in mind, more and more users come to our factory to choose construction waste crusher . Our SBM production of construction waste crusher and other manufacturers of our equipment, the same quality and cheap, simple structure, easy to use, high efficiency, long life, wide range of applications, it can be said is suitable for the majority of users can use Good equipment. And we are a manufacturer of independent research and development production and marketing services as one of the manufacturers, we here are the prices of equipment we follow the market and may be, so we will give you a certain discount sales, and here we can Free to experience the test machine, I believe you will like our construction waste crusher, so if you need cheap, good quality equipment, come to our factory, we will meet your requirements.

Bauxite (bauxite), also known as bauxite or bauxite, the main component is alumina, aluminum oxide containing impurities, is a kind of earthy mineral. White or gray, yellow or light red due to iron. Density 3.9 ~ 4g / cm3, hardness 1 ~ 3, opaque, brittle. Extremely difficult to melt. Do not dissolve in water, soluble in sulfuric acid, sodium hydroxide solution. Mainly used for aluminum, refractory system. Modern aluminum industry uses molten cryolite-alumina (cryolite) to directly dissolve the alumina powder milled by the mill, obtain the molten aluminum by electrolysis, and then cast into aluminum ingots or other strand shapes. After ingot into industrial applications, there are two categories: cast aluminum and deformed aluminum. Casting aluminum and aluminum alloys are castings made of aluminum by the casting method. Deformed aluminum and aluminum alloys are processed products of aluminum by pressure processing: plates, strips, foils, tubes, rods, patterns, wires and forgings.

Traditional aluminum production using imported large milling machine grinding and grinding of raw materials, high cost, the use of domestic mill equipment, low efficiency, so difficult to weigh about, long plagued the development of aluminum companies. The Shanghai SBM introduced a new ultrafine mill on a timely manner to solve this problem. Years of research and development of the latest technology, efficient production capacity, a wide range of grinding particle size and energy saving design concept, the application of ultrafine mill truly realized the production process of economic efficiency and production efficiency of the combination. The introduction of a lower equipment can bring greater production capacity, the introduction of the new mill will undoubtedly bring a new impetus to the domestic electrolytic aluminum industry, the electrolytic aluminum and even the entire powder industry to bring the fast lane .

From:http://www.canadacrusher.com/news/news-124.html

First, SBM Heavy Industries is located in Henan, after all, a development here in the province, so the overall economic development, as well as per capita consumption compared to the affordable range for Shanghai, Guangzhou high-consumption areas, there is certainly still some gaps In addition, manufacturers in various regions in the pricing sand making machine prices are generally refer to the local economic conditions, so doomed SBM Heavy Industry in Henan sand making machine price will not be too high; Second, the production of sand in Henan Province Machine equipment manufacturers have many peer competition between the more intense, though not on the market sand making machine prices caused great fluctuations, but at least the price of pebble sand machine in Henan will not rise too fast; Finally, SBM Heavy Industries Sand factory or a factory direct manufacturers, so given the lowest price for the sand making ex-factory price, although it may not be the lowest sand industry, but at least under the premise of the same quality, SBM heavy sand making machine price is absolutely More concessions, it is recommended that users in the purchase of sand making equipment, may wish to consider SBM heavy sand making machine manufacturers.Now the direction of economic development towards the development of green, then the sand making industry must advance with the times, in production must pay attention to the handling of dust, the new sand making machine in the raw material crushing system crusher dust crusher Or grinder feed port ﹑ discharge port, the upper part of the shaker, and belt conveyor transfer point and other parts, a closed device or dust cover, transfer points should be set double sealed enclosures, the sand machine equipment The cover is closed or the dust collection chamber is made to make the cover a uniform negative pressure so as to prevent the dust generated by the sand making machine from escaping or the suction hood is used to form the suction airflow to control the exposed dust area Smaller range, so that carrying the dust flow is sucked and pumped away, through the purifier after discharge into the atmosphere through the exhaust pipe.As a large professional sand making direct manufacturer, SBM Heavy Sand output devices both in selection of raw materials, or in the production of high-end technical references, and other aspects of production and production processes can be called industry-leading, plus it, SBM Heavy Industries also set up factories in the main consumer markets in the lower regions of Henan, so compared to other regions, other types of manufacturers given Sand price, SBM Heavy Sand price definitely be more favorable, though probably not be The industry's lowest, but at least 1-2 points less favorable than it, so for the majority of pre-investment sand making equipment business users, SBM Heavy Industries will definitely be a good choice. As for SBM heavy sand making machine price how much money? If you wish to learn more, please feel free to consult SBM Heavy Industries customer service staff.
Pages: 1 2 »